Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Edina
Edina garages are rarely simple. The city’s first-ring homes carry mature lots, tight driveways, and openings that were sized in the 1920s and left alone since. We install new doors and modernize the hardware that runs them, and we do it in Edina, MN with a measure-first process so the door that shows up on install day actually fits. Our technicians have up to 12 years of experience, and every job starts with a written estimate and a scheduled install date. If you need a door sized and priced, call (855) 710-3186 for a free estimate.

Why Edina Homeowners Call Garage Door Repair Linden Hills for Garage Door Installation
We’re a garage door specialist, not a general contractor who happens to hang a door on the side. That matters in a city where a replacement often means a custom-fit sectional built to a narrow opening and matched to the facade. The local professionals we connect you with are licensed and insured as their state requires, and the price gets quoted and agreed before any work starts.
We work across the brands already installed in Edina homes and businesses: LiftMaster and Chamberlain openers, Clopay and Genie systems. No job gets turned away because the hardware is unfamiliar. One call covers the door and the opener, so you’re not coordinating two separate contractors for a single opening.
We serve Edina directly, along with the neighborhoods and towns around it. Appointments get scheduled around your driveway and the season. Winter installs happen too – a storm or a failed spring doesn’t wait for spring thaw, and we don’t make you wait either.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Edina
New Door Installation
A new door for an Edina home is often a custom-fit job, especially in the older sections of 55436 where the opening is undersized by modern standards. We measure the rough opening, check the header, and specify a door that carries the right weight for the springs you’ll actually run. See our garage door installation team for the full scope.
Single Car Door
Single-car openings in Edina’s 1920s to 1950s homes were often built compact, and many have been widened slightly over the decades without the header or spring balance being updated to match. We confirm the opening is square and true before we specify a door, because an uneven opening will wear a new door prematurely.
Double Car Door
A double-car door covers a lot of surface area, and in Edina’s climate that surface takes wind, freeze-thaw movement, and a steady dose of debris. We size the torsion springs for the door’s actual weight and specify an opener rated for the load, so the door runs evenly through a full season of use. Custom Garage Door
If your Edina home has a brick, stucco, or shake facade, the door has to read as part of the house, not an afterthought bolted onto it. We match panel profiles, window layouts, and color to the existing detail, and we account for header size and jamb depth so the new door sits flush and operates cleanly.
Trusted Brands We Service in Edina
The doors and openers already in Edina homes lean on a handful of names: LiftMaster, Chamberlain, Genie, and Clopay are common, and we know how each one measures, mounts, and behaves. If your existing system is one of these and you’re replacing the door, we can often spec a new door that works with the opener you already have. We don’t stock parts locally, so we order what the job needs and schedule the install once it’s in. No unfamiliar-brand surprises.

See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Installation Problems We See in Edina Homes
- Undersized headers in older Edina homes. Many 55436 garages were retrofitted with openings that hide a header too small to carry a heavy door, which limits door weight and spring options and leads to premature spring failure or a door that won’t stay balanced.
- Narrow, low-clearance openings. A 1950s attached garage in Edina often can’t fit a standard double door, so the install requires a custom-width sectional and a low-profile opener rail that clears the ceiling.
- Debris and ice from overhanging oaks and elms. The mature trees over 55436 driveways drop twigs, leaves, and ice onto tracks and photo-eye sensors, jamming the door and causing uneven travel. A proper install includes track alignment and sensor placement that tolerates the debris field.
- Freeze-thaw wear on the moving parts. Road-salt spray off Highway 100 and France Avenue works into bottom seals and hinges, and cold snaps are when springs and openers fail. A new door install is the right time to replace the weather seal and inspect drums, cables, and end bearing plates in one visit.
Pricing for Garage Door Installation in Edina, MN
Installation pricing in Edina runs from typical estimated ranges, and the written estimate you get on site sets the final number. A standard new door install falls in the $700 – $2200 range depending on door size, material, and window options. Custom-fit doors for narrow or low-clearance openings sit at the higher end. Opener installation runs $250 – $550, and repair work on your existing door runs $150 – $600.
| Service | Typical Estimated Range |
|---|---|
| New Door Installation | $700 – $2200 |
| Garage Door Repair | $150 – $600 |
| Opener Installation | $250 – $550 |
What drives cost up: custom widths, premium facades, high-cycle springs, and heavier double doors. What keeps it down: a standard-size single door on a square opening. Every estimate is free, and the price is quoted and agreed before any work starts, so there’s no surprise invoice after the install. Call (855) 710-3186 for numbers specific to your opening.
We Also Serve Cities Near Edina
Edina sits among some of the Twin Cities’ most established neighborhoods, and we serve the surrounding area too: Fulton, Lake Harriet, Linden Hills, and St. Louis Park. If your garage is in any of these, the same measure-first process applies. Learn more about the towns we cover, including Edina, when you call.
Serving Edina, MN – Our Local Coverage Area
We serve Edina and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Edina
A narrow, low-clearance opening in 55436 almost always needs a custom-width sectional door with a low-profile opener, not an off-the-shelf unit. A qualified installer measures the rough opening, checks the header size, and specifies a door weight that matches the spring capability. That’s the step most standard installs skip, and it’s why custom-fit work here is the norm. Call (855) 710-3186 for a free measure and written quote.
Freeze-thaw cycles stress torsion springs as the metal expands and contracts repeatedly, which is why cold snaps are when Edina springs snap. For a new install, specify high-cycle torsion springs rated for 25,000+ cycles. That rating matters in this climate. Ask for it in the estimate. Call (855) 710-3186 to get a spring rating and price in writing.
A standard opener often can’t handle a heavy double door on its own, particularly in Edina’s older homes with undersized headers that limit spring assistance. You’ll want a heavier-duty opener rated for the door’s actual weight. We size the opener to the load during the estimate, so the system matches. Call (855) 710-3186 for a free opener sizing estimate.
Photo-eye sensors and tracks jam in Edina because mature oaks and elms overhang the 55436 driveways and drop debris and ice directly onto the hardware. A proper install places the sensors where falling material misses them and aligns the tracks so they tolerate a little debris. Call (855) 710-3186 to schedule a placement-based install.
Replacing a door on a brick or stucco facade in Edina means matching the panel profile, window layout, and color to the existing house detail, plus accounting for header size and jamb depth so the new door sits flush. The mechanism still matters: springs and opener sized to the door’s weight. Call (855) 710-3186 for a free measure and a written price.
Ready for a door that fits and works through an Edina winter? Call (855) 710-3186 for a free estimate. We’ll measure, check the header, and give you a written price before any work starts. The price you agree to is the price you pay – that’s how we handle every install in Edina.
Written by the team at Garage Door Repair Linden Hills.